Spare Parts

9 customer reviews

*** LARGE STAND OFFS DO NOT FIT THE FOLLOWING MODELS:
A-100, Appalachian, CQC-17, CQC-8, CQC-8 Flipper, Folding Steak Knife, Market Skinner, Mini A-100, Mini Commander, Mini CQC-7, Mini CQC-7 Flipper, Mini Seax, Overland Renegade, Rendezvous, Super Commander

*** Please note knives with colored/special handles may require different length clip screws. Please call prior to ordering.

Ball Bearings Set Specification: Set comes with 2 ball bearings washers plus two metal washers for all flipper models. Fits all ball bearings flipper models:CQC-7 Flipper, Karambit Flipper, Mini CQC-7 Flipper, CQC-8 Flipper, Sheepdog models, Mini Sheepdog, Huck Flipper, All XHD Flipper Models, etc. *****Please note: These washers are not compatible with non-flipper models*****

Earn 16 Rewards Points When You Order This Item.

$6.00

SKU: GRKAC-SP Tags: , , , ,

Spare Parts

9 customer reviews

*** LARGE STAND OFFS DO NOT FIT THE FOLLOWING MODELS:
A-100, Appalachian, CQC-17, CQC-8, CQC-8 Flipper, Folding Steak Knife, Market Skinner, Mini A-100, Mini Commander, Mini CQC-7, Mini CQC-7 Flipper, Mini Seax, Overland Renegade, Rendezvous, Super Commander

*** Please note knives with colored/special handles may require different length clip screws. Please call prior to ordering.

Ball Bearings Set Specification: Set comes with 2 ball bearings washers plus two metal washers for all flipper models. Fits all ball bearings flipper models:CQC-7 Flipper, Karambit Flipper, Mini CQC-7 Flipper, CQC-8 Flipper, Sheepdog models, Mini Sheepdog, Huck Flipper, All XHD Flipper Models, etc. *****Please note: These washers are not compatible with non-flipper models*****

PRODUCT OPTIONS:

Earn 16 Rewards Points When You Order This Item.

$6.00

SKU: GRKAC-SP Tags: , , , ,

Need pieces for your everyday carry? Emerson Knives Spare Parts range from Pivot Bolts to Handle Screws, we have you covered. Emerson Knives can take quite the beating but just like a classic car, they need a little TLC everyone now and again.

Important:

If your Emerson was purchased before 2014, chances are that your knife has a solid backspacer (see pics). These knives require specific handle screws that are not compatible with our current standoff models. Make sure you select the correct screws before placing your order.

 

*** Please note knives with colored/special handles may require different length clip screws. Please call prior to ordering.

Please note that spare parts DO NOT include the actual standoffs or back spacers themselves. We do not sell these as inventory parts. If your backspacer or standoffs needs servicing, we strongly recommend you send in your knife for warranty repair.

These spare parts are not compatible with frame locks, XHD Models or handmade Emerson Custom Knives.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

9 reviews for Spare Parts

  1. evantra.mazzanti@mail.com

    ZT and Benchmade send you spare parts for FREE.
    I bought my NOS Emerson Vindicator on the secondary market, and there is no way I will ever give Emerson any of my hard earned money when they charge for even the air you breathe.
    Good knives, sure, not the best ones by far, but man, is this guy greedy!

  2. Tacoma4x4girl

    I upgraded my Mini CQC-15 to the larger satin stand-offs and it look so good much better than the small black ones! One day I will make the jump to the anodized titanium parts. I like the blue and green colors.

  3. Michael cole

    I need new G10 scales for one of my Emerson knives

    • Admin

      Hi Michael, Please email us at info@emersonknives.com and we will get you taken care of.

  4. JohnnyBoy

    I love that I can purchase extra parts for my knives! Glad they offer these.

  5. Kyle Worden

    My Journeyman knife itself has been a successful, daily carry winner over many of my top brands; MOD, Benchmade, Gerber, Spyderco, auto & manual openers. I'm retired Army and been using all different kinds and models, and all them from what I remember have stood 100% behind there products. Even if, I only needed one to a few replacement parts (like now – the 3, I need for my Journeyman tan handle w/ tan para cord & pewter skull, knife, from Emerson). They sometimes, even when I only asked for what I needed, they would go far & beyond and send entire parts kits, including S&H, at no charge.
    I just looked up the Emerson website replacement parts: Black Clip Screws (3) & only need (1) @ $6 & Handle Screws (6) for Model with Standoffs & only need (2) @ $10, plus; Ground (UPS): $13.29, for a Total: $29.29
    I writing to let you know of my complete disappointment in Emerson Knife Co. Almost $30 dollars for three screws is ridiculous. I bet that the three screws at a minimal cost to cover the price of them, would fit in a small envelope with a $0.49 cent 1st class stamp. This email should not have been necessary and may very well be the last product or communica, I ever have with Emerson Knife Co.

  6. Ed

    Does it include pivot washers? The description doesn't mention them.

  7. Ed

    Where can I get new pivot bushings/washers for the blade?

  8. stevek

    Agree with Adam above. I ordered a CQC-7V and all the parts are going to be silver satin except the standoffs will be black. Will be ordering a silver set if/when they are made available.

  9. ADAM (verified owner)

    Please bring back the Satin parts Ernest!

Add a review

Your email address will not be published. Required fields are marked *


You may also like…